What apprenticeships are available for cabinet makers in Georgia?

In Georgia, apprenticeships are typically registered through state apprenticeship agencies and trade union locals. See the apprenticeship section above for current contact information.

How to Become a Cabinet Maker in Georgia (2026)

Q: How much do cabinet makers earn in Georgia?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), cabinet makers in Georgia earned a median annual wage of approximately $42,280. Employment concentration in Georgia is about 1.54 times the national average for this occupation.

Q: What is the job outlook for cabinet makers in Georgia?

Georgia currently employs approximately 3,740 workers, and the U.S. Bureau of Labor Statistics projects -1.6% national employment change for this occupation from 2024 to 2034.

Updated September 2, 2026 | TradeCareerPath Editorial Team

Georgia cabinetmakers and bench carpenters earn a median annual wage of $42,280 ($20.33/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 3,740 workers employed statewide. The state median is approximately -9.4% below the national median of $46,680 for the same occupation.

Key Takeaways

Median annual pay: $42,280 ($20.33/hr)
25th percentile: $36,590 per year
75th percentile: $47,800 per year
Top 10% earn: more than $58,610 per year
Entry-level (bottom 10%): under $30,930 per year
Workers employed in Georgia: 3,740
Versus national median: -9.4% below the U.S. median of $46,680
Job concentration: Location quotient 1.54 - this occupation is more concentrated in Georgia than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed September 2, 2026.

Georgia employs about 3,740 cabinet makers earning a median $42,280 a year (BLS OEWS, May 2025). Most cabinet makers train through a trade school program or a registered apprenticeship before entering the field in Georgia.

Georgia employs approximately 3,740 cabinet makers according to the Bureau of Labor Statistics, with a median annual wage of $42,280 ¹. The state’s concentration of cabinet maker jobs is 1.54x the national average, indicating strong demand. Nationally, cabinet maker employment is projected to grow -1.6% from 2024 to 2034, with about 8,100 openings per year ². This page covers how to become a Cabinet Maker in Georgia, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Georgia): $42,280 per year ¹

Quick Answers About How to Become a Cabinet Maker in Georgia

How to become a Cabinet Maker in Georgia? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cabinet makers in Georgia.

How long does it take? Most paths into the cabinet maker field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cabinet makers earn in Georgia? The median annual wage for cabinet makers in Georgia is $42,280 according to BLS data. Entry-level wages start around $30,930 and experienced professionals can earn $58,610 or more ¹.

How to Become a Cabinet Maker in Georgia

Finish high school or earn a GED. Most Georgia training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Georgia that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cabinet makers in Georgia before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Cabinet Maker Apprenticeship Information in Georgia

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years.

Contact Information:

Office: Chatham Apprentice Program - StepUp Savannah
Address: 428 Bull Street, Savannah, GA 31401
Phone: (912) 232-6747

Cabinet Maker Wages by Metro Area in Georgia

Cabinetmakers and Bench Carpenters Wages by Metro Area in Georgia

According to the Bureau of Labor Statistics ( OES data), cabinetmakers and bench carpenters wages in Georgia vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Atlanta-Sandy Springs-Roswell	1,950	$45,120	$45,200	$35,290	$58,510
Savannah	240	$58,670	$55,810	$36,230	$73,230
Augusta-Richmond County	100	$41,640	$42,760	$31,200	$57,960
Gainesville	100	$43,050	$43,970	$34,110	$57,710
Chattanooga	100	$43,770	$43,740	$34,940	$56,310
Athens-Clarke County	70	$40,990	$42,430	$30,700	$51,540
Columbus	60	$36,400	$37,920	$29,640	$48,310
Valdosta	60	$30,310	$34,700	$28,410	$41,690
Albany	40	$36,950	$39,480	$29,320	$47,780

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cabinet makers in Georgia? Georgia currently employs approximately 3,740 cabinet makers ¹. Nationally, cabinet maker employment is projected to grow -1.6% from 2024 to 2034 ².

What training programs are available in Georgia? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Georgia.

How much do cabinet makers earn in Georgia compared to the national average? The median annual wage for cabinet makers in Georgia is $42,280, which is $3,740 below the national median of $46,020 according to BLS data ¹.

In Georgia

Best Trade Schools in Georgia (2026)

Explore More Trades in Georgia

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)