What apprenticeships are available for cnc machinists in Maine?

In Maine, registered apprenticeships are administered through the Maine Apprenticeship Program, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a CNC Machinist in Maine (2026)

Q: How much do cnc machinists earn in Maine?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), cnc machinists in Maine earned a median annual wage of approximately $59,160. Employment concentration in Maine is about 1.50 times the national average for this occupation.

Q: What is the job outlook for cnc machinists in Maine?

Maine currently employs approximately 1,780 workers, and the U.S. Bureau of Labor Statistics projects 0.0% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Maine machinists earn a median annual wage of $59,160 ($28.44/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 1,780 workers employed statewide. The state median is approximately 0.7% above the national median of $58,750 for the same occupation.

Key Takeaways

Median annual pay: $59,160 ($28.44/hr)
25th percentile: $50,090 per year
75th percentile: $72,640 per year
Top 10% earn: more than $78,380 per year
Entry-level (bottom 10%): under $45,760 per year
Workers employed in Maine: 1,780
Versus national median: 0.7% above the U.S. median of $58,750
Job concentration: Location quotient 1.50 - this occupation is more concentrated in Maine than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Maine employs about 1,780 cnc machinists earning a median $59,160 a year (BLS OEWS, May 2025). Most cnc machinists train through a trade school program or a registered apprenticeship before entering the field in Maine.

Compare CNC Machinist Schools in Maine

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Northern Maine Community College	64.6	$4,156 in-state / $7,036 out-of-state	$44,985	42%	Yes*	124 mi
2	Kennebec Valley Community College	61.5	$4,156 in-state / $7,036 out-of-state	$52,079	39%	Yes*	40 mi
Sponsored Ad
3	Central Maine Community College	58.7	$4,140 in-state / $7,020 out-of-state	$51,345	30%	Yes*	84 mi
4	Quinsigamond Community College	58.1	$6,262 in-state / $11,206 out-of-state	$55,076	22%	Yes*	232 mi
Sponsored Ad
5	NHTI-Concord's Community College	56.4	$7,200 in-state / $15,450 out-of-state	$55,056	29%	Yes*	173 mi
6	York County Community College	56.0	$4,156 in-state / $7,036 out-of-state	$46,153	34%	Yes*	142 mi
Sponsored Ad
7	Southeastern Technical Institute	54.0	Contact school for pricing	$48,037	74%	—	233 mi
8	Bristol Community College	49.8	$5,832 in-state / $10,776 out-of-state	$48,840	22%	Yes*	252 mi
Sponsored Ad
9	Nashua Community College	49.0	$7,140 in-state / $15,390 out-of-state	$54,792	38%	Yes*	196 mi
10	Southern Maine Community College	46.5	$4,156 in-state / $7,036 out-of-state	$53,543	28%	Yes*	112 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Maine employs approximately 1,780 cnc machinists according to the Bureau of Labor Statistics, with a median annual wage of $59,160 ¹. The state’s concentration of cnc machinist jobs is 1.50x the national average, indicating strong demand. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034, with about 29,500 openings per year ². This page covers how to become a CNC Machinist in Maine, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Maine): $59,160 per year ¹

Quick Answers About How to Become a CNC Machinist in Maine

How to become a CNC Machinist in Maine? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cnc machinists in Maine.

How long does it take? Most paths into the cnc machinist field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cnc machinists earn in Maine? The median annual wage for cnc machinists in Maine is $59,160 according to BLS data. Entry-level wages start around $45,760 and experienced professionals can earn $78,380 or more ¹.

How to Become a CNC Machinist in Maine

Finish high school or earn a GED. Most Maine training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Maine that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cnc machinists in Maine before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

CNC Machinist Apprenticeship Information in Maine

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. Maine’s apprenticeship program is administered by the Maine Apprenticeship Program ³.

Contact Information:

Office: Maine Department of Labor, Bureau of Employment Services
Address: 55 State House Station, Augusta, ME 04333-0055
Phone: (207) 623-7969
Email: [email protected]

CNC Machinist Wages by Metro Area in Maine

Machinists Wages by Metro Area in Maine

According to the Bureau of Labor Statistics ( OES data), machinists wages in Maine vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Portland-South Portland	1,100	$65,200	$64,540	$50,540	$80,250
Lewiston-Auburn	90	$59,020	$55,970	$37,330	$65,670
Bangor	70	$54,080	$56,340	$35,880	$72,740

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cnc machinists in Maine? Maine currently employs approximately 1,780 cnc machinists ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034 ².

What training programs are available in Maine? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Maine. You can also contact the Maine Apprenticeship Program for apprenticeship opportunities.

How much do cnc machinists earn in Maine compared to the national average? The median annual wage for cnc machinists in Maine is $59,160, which is $3,010 above the national median of $56,150 according to BLS data ¹.

In Maine

Best Trade Schools in Maine (2026)

Top local programs

Explore More Trades in Maine

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
Maine Apprenticeship Program: https://joblink.maine.gov/ada/r/search/jobs?keywords=apprentice ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)