What apprenticeships are available for cnc machinists in Nevada?

In Nevada, registered apprenticeships are administered through the Nevada Office of the Labor Commissioner, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a CNC Machinist in Nevada (2026)

Q: How much do cnc machinists earn in Nevada?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), cnc machinists in Nevada earned a median annual wage of approximately $53,050. Employment concentration in Nevada is roughly 0.31 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for cnc machinists in Nevada?

Nevada currently employs approximately 900 workers, and the U.S. Bureau of Labor Statistics projects 0.0% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Nevada machinists earn a median annual wage of $53,050 ($25.51/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 900 workers employed statewide. The state median is approximately -9.7% below the national median of $58,750 for the same occupation.

Key Takeaways

Median annual pay: $53,050 ($25.51/hr)
25th percentile: $46,090 per year
75th percentile: $62,830 per year
Top 10% earn: more than $77,290 per year
Entry-level (bottom 10%): under $39,420 per year
Workers employed in Nevada: 900
Versus national median: -9.7% below the U.S. median of $58,750
Job concentration: Location quotient 0.31 - this occupation is less concentrated in Nevada than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Nevada employs about 900 cnc machinists earning a median $53,050 a year (BLS OEWS, May 2025). Most cnc machinists train through a trade school program or a registered apprenticeship before entering the field in Nevada.

Compare CNC Machinist Schools in Nevada

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	San Joaquin Delta College	66.6	Contact school for pricing	Not reported	Not reported	Yes*	231 mi
2	Modesto Junior College	64.3	Contact school for pricing	$46,619	28%	Yes*	216 mi
Sponsored Ad
3	Truckee Meadows Community College	63.0	Contact school for pricing	$55,261	30%	Yes*	184 mi
4	Dixie Technical College	58.7	Contact school for pricing	$46,064	80%	—	200 mi
Sponsored Ad
5	Western Nevada College	56.1	Contact school for pricing	$50,403	39%	Yes*	170 mi
6	Madera Community College	55.8	Contact school for pricing	Not reported	34%	—	175 mi
Sponsored Ad
7	Sierra College	54.5	Contact school for pricing	$47,159	40%	—	231 mi
8	Great Basin College	52.3	Contact school for pricing	$57,602	46%	Yes*	212 mi
Sponsored Ad
9	San Bernardino Valley College	42.3	Contact school for pricing	$55,935	24%	Yes*	267 mi
10	Reedley College	41.6	$1,334 - $16,881	$42,644	42%	—	161 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Nevada employs approximately 900 cnc machinists according to the Bureau of Labor Statistics, with a median annual wage of $53,050 ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034, with about 29,500 openings per year ². This page covers how to become a CNC Machinist in Nevada, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Nevada): $53,050 per year ¹

Quick Answers About How to Become a CNC Machinist in Nevada

How to become a CNC Machinist in Nevada? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cnc machinists in Nevada.

How long does it take? Most paths into the cnc machinist field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cnc machinists earn in Nevada? The median annual wage for cnc machinists in Nevada is $53,050 according to BLS data. Entry-level wages start around $39,420 and experienced professionals can earn $77,290 or more ¹.

How to Become a CNC Machinist in Nevada

Finish high school or earn a GED. Most Nevada training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Nevada that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cnc machinists in Nevada before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

CNC Machinist Apprenticeship Information in Nevada

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. Nevada’s apprenticeship program is administered by the Nevada Office of the Labor Commissioner ³.

Contact Information:

Office: Office of the Labor Commissioner
Address: 3340 West Sahara Avenue, Las Vegas, NV 89102
Phone: (702) 486-2650
Email: [email protected]

CNC Machinist Wages by Metro Area in Nevada

Machinists Wages by Metro Area in Nevada

According to the Bureau of Labor Statistics ( OES data), machinists wages in Nevada vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Las Vegas-Henderson-North Las Vegas	340	$48,990	$54,310	$39,420	$74,090
Reno	280	$58,170	$57,730	$40,590	$77,730
Carson City	160	$51,670	$54,430	$33,690	$75,560

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cnc machinists in Nevada? Nevada currently employs approximately 900 cnc machinists ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034 ².

What training programs are available in Nevada? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Nevada. You can also contact the Nevada Office of the Labor Commissioner for apprenticeship opportunities.

How much do cnc machinists earn in Nevada compared to the national average? The median annual wage for cnc machinists in Nevada is $53,050, which is $3,100 below the national median of $56,150 according to BLS data ¹.

In Nevada

Best Trade Schools in Nevada (2026)

Top local programs

Explore More Trades in Nevada

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
Nevada Office of the Labor Commissioner: http://owinn.nv.gov/Apprenticeship/Apprenticeship-Home/ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)