What apprenticeships are available for cnc machinists in Oklahoma?

In Oklahoma, apprenticeships are typically registered through state apprenticeship agencies and trade union locals. See the apprenticeship section above for current contact information.

How to Become a CNC Machinist in Oklahoma (2026)

Q: How much do cnc machinists earn in Oklahoma?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), cnc machinists in Oklahoma earned a median annual wage of approximately $51,120. Employment concentration in Oklahoma is about 1.34 times the national average for this occupation.

Q: What is the job outlook for cnc machinists in Oklahoma?

Oklahoma currently employs approximately 4,230 workers, and the U.S. Bureau of Labor Statistics projects 0.0% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Oklahoma machinists earn a median annual wage of $51,120 ($24.58/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 4,230 workers employed statewide. The state median is approximately -13.0% below the national median of $58,750 for the same occupation.

Key Takeaways

Median annual pay: $51,120 ($24.58/hr)
25th percentile: $45,670 per year
75th percentile: $62,050 per year
Top 10% earn: more than $70,870 per year
Entry-level (bottom 10%): under $36,380 per year
Workers employed in Oklahoma: 4,230
Versus national median: -13.0% below the U.S. median of $58,750
Job concentration: Location quotient 1.34 - this occupation is more concentrated in Oklahoma than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Oklahoma employs about 4,230 cnc machinists earning a median $51,120 a year (BLS OEWS, May 2025). Most cnc machinists train through a trade school program or a registered apprenticeship before entering the field in Oklahoma.

Compare CNC Machinist Schools in Oklahoma

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Gordon Cooper Technology Center	75.4	Contact school for pricing	$43,075	90%	—	34 mi
2	Mid-America Technology Center	74.9	Contact school for pricing	$33,219	100%	—	66 mi
Sponsored Ad
3	Green Country Technology Center	74.8	Contact school for pricing	$37,261	67%	—	58 mi
4	Tulsa Technology Center	68.6	Contact school for pricing	$42,754	81%	—	60 mi
Sponsored Ad
5	Indian Capital Technology Center-Muskogee	68.1	Contact school for pricing	$36,725	100%	—	92 mi
6	Pioneer Technology Center	54.4	Contact school for pricing	$37,175	73%	—	63 mi
Sponsored Ad
7	Cowley County Community College	52.2	$4,800 in-state / $6,600 out-of-state	$42,324	45%	Yes*	86 mi
8	Canadian Valley Technology Center	48.7	Contact school for pricing	$48,081	71%	—	60 mi
Sponsored Ad
9	Autry Technology Center	43.0	Contact school for pricing	$44,150	75%	—	67 mi
10	Kiamichi Technology Center-McAlester	42.2	Contact school for pricing	$36,651	45%	—	92 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Oklahoma employs approximately 4,230 cnc machinists according to the Bureau of Labor Statistics, with a median annual wage of $51,120 ¹. The state’s concentration of cnc machinist jobs is 1.34x the national average, indicating strong demand. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034, with about 29,500 openings per year ². This page covers how to become a CNC Machinist in Oklahoma, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Oklahoma): $51,120 per year ¹

Quick Answers About How to Become a CNC Machinist in Oklahoma

How to become a CNC Machinist in Oklahoma? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cnc machinists in Oklahoma.

How long does it take? Most paths into the cnc machinist field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cnc machinists earn in Oklahoma? The median annual wage for cnc machinists in Oklahoma is $51,120 according to BLS data. Entry-level wages start around $36,380 and experienced professionals can earn $70,870 or more ¹.

How to Become a CNC Machinist in Oklahoma

Finish high school or earn a GED. Most Oklahoma training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Oklahoma that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cnc machinists in Oklahoma before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

CNC Machinist Apprenticeship Information in Oklahoma

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years.

Contact Information:

Office: Oklahoma CareerTech
Address: 1500 West 7th Ave., Stillwater, OK 74074
Phone: (405) 231-4338
Email: [email protected]

CNC Machinist Wages by Metro Area in Oklahoma

Machinists Wages by Metro Area in Oklahoma

According to the Bureau of Labor Statistics ( OES data), machinists wages in Oklahoma vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Tulsa	2,000	$53,260	$54,280	$37,020	$68,340
Oklahoma City	1,130	$57,780	$55,510	$35,670	$73,760
Fort Smith	230	$50,560	$52,030	$39,240	$63,770
Lawton	90	$51,290	$54,980	$46,080	$73,520
Enid	70	$46,460	$45,620	$31,680	$58,120

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cnc machinists in Oklahoma? Oklahoma currently employs approximately 4,230 cnc machinists ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034 ².

What training programs are available in Oklahoma? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Oklahoma.

How much do cnc machinists earn in Oklahoma compared to the national average? The median annual wage for cnc machinists in Oklahoma is $51,120, which is $5,030 below the national median of $56,150 according to BLS data ¹.

In Oklahoma

Best Trade Schools in Oklahoma (2026)

Top local programs

Explore More Trades in Oklahoma

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)