What apprenticeships are available for cnc machinists in Oregon?

In Oregon, registered apprenticeships are administered through the Oregon Apprenticeship and Training Division, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a CNC Machinist in Oregon (2026)

Q: How much do cnc machinists earn in Oregon?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), cnc machinists in Oregon earned a median annual wage of approximately $63,820. Employment concentration in Oregon is roughly 0.76 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for cnc machinists in Oregon?

Oregon currently employs approximately 2,760 workers, and the U.S. Bureau of Labor Statistics projects 0.0% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Oregon machinists earn a median annual wage of $63,820 ($30.68/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 2,760 workers employed statewide. The state median is approximately 8.6% above the national median of $58,750 for the same occupation.

Key Takeaways

Median annual pay: $63,820 ($30.68/hr)
25th percentile: $52,930 per year
75th percentile: $76,070 per year
Top 10% earn: more than $86,580 per year
Entry-level (bottom 10%): under $47,040 per year
Workers employed in Oregon: 2,760
Versus national median: 8.6% above the U.S. median of $58,750
Job concentration: Location quotient 0.76 - this occupation is less concentrated in Oregon than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Oregon employs about 2,760 cnc machinists earning a median $63,820 a year (BLS OEWS, May 2025). Most cnc machinists train through a trade school program or a registered apprenticeship before entering the field in Oregon.

Compare CNC Machinist Schools in Oregon

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Lower Columbia College	66.5	$4,626 in-state / $6,003 out-of-state	$52,301	23%	Yes*	78 mi
2	Perry Technical Institute	65.3	Contact school for pricing	$63,923	79%	—	139 mi
Sponsored Ad
3	Bates Technical College	65.2	$6,027 in-state / $12,165 out-of-state	Not reported	43%	Yes*	152 mi
4	Clover Park Technical College	63.9	$6,634	$51,699	43%	Yes*	146 mi
Sponsored Ad
5	Clark College	63.1	$5,233 in-state / $11,183 out-of-state	$49,337	39%	Yes*	41 mi
6	South Puget Sound Community College	59.0	$5,252 in-state / $5,813 out-of-state	$50,185	44%	—	138 mi
Sponsored Ad
7	Clackamas Community College	57.1	$6,345 in-state / $14,265 out-of-state	$54,462	23%	Yes*	19 mi
8	Yakima Valley College	55.9	$5,312 in-state / $5,873 out-of-state	$51,006	29%	—	140 mi
Sponsored Ad
9	Chemeketa Community College	49.9	$6,345 in-state / $14,040 out-of-state	$50,594	21%	Yes*	27 mi
10	Mt Hood Community College	48.8	$5,247 in-state / $9,819 out-of-state	$52,184	24%	Yes*	32 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Oregon employs approximately 2,760 cnc machinists according to the Bureau of Labor Statistics, with a median annual wage of $63,820 ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034, with about 29,500 openings per year ². This page covers how to become a CNC Machinist in Oregon, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Oregon): $63,820 per year ¹

Quick Answers About How to Become a CNC Machinist in Oregon

How to become a CNC Machinist in Oregon? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cnc machinists in Oregon.

How long does it take? Most paths into the cnc machinist field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cnc machinists earn in Oregon? The median annual wage for cnc machinists in Oregon is $63,820 according to BLS data. Entry-level wages start around $47,040 and experienced professionals can earn $86,580 or more ¹.

How to Become a CNC Machinist in Oregon

Finish high school or earn a GED. Most Oregon training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Oregon that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cnc machinists in Oregon before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

CNC Machinist Apprenticeship Information in Oregon

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. Oregon’s apprenticeship program is administered by the Oregon Apprenticeship and Training Division ³.

Contact Information:

Office: Apprenticeship and Training Division, Oregon State Bureau of Labor and Industries
Address: 1800 SW 1st Ave, Portland, OR 97201
Phone: (971) 245-3844
Email: [email protected]

CNC Machinist Wages by Metro Area in Oregon

Machinists Wages by Metro Area in Oregon

According to the Bureau of Labor Statistics ( OES data), machinists wages in Oregon vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Portland-Vancouver-Hillsboro	2,090	$64,170	$66,900	$48,900	$83,480
Eugene-Springfield	230	$55,440	$56,380	$40,250	$76,920
Albany	190	$71,300	$70,390	$46,170	$91,930
Salem	110	$58,930	$58,150	$41,040	$73,640
Bend	90	$62,890	$60,990	$47,250	$74,950
Medford	70	$60,370	$60,110	$40,830	$82,040
Grants Pass	50	$47,870	$50,840	$36,320	$69,730
Corvallis	30	$51,110	$53,640	$36,670	$68,350

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cnc machinists in Oregon? Oregon currently employs approximately 2,760 cnc machinists ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034 ².

What training programs are available in Oregon? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Oregon. You can also contact the Oregon Apprenticeship and Training Division for apprenticeship opportunities.

How much do cnc machinists earn in Oregon compared to the national average? The median annual wage for cnc machinists in Oregon is $63,820, which is $7,670 above the national median of $56,150 according to BLS data ¹.

In Oregon

Best Trade Schools in Oregon (2026)

Top local programs

Explore More Trades in Oregon

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
Oregon Apprenticeship and Training Division: https://www.oregon.gov/boli/apprenticeship/pages/apprenticeship-opportunities.aspx ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)