How to Become a CNC Machinist in Utah (2026)

Updated June 8, 2026 | TradeCareerPath Editorial Team

Utah employs about 3,810 cnc machinists earning a median $61,280 a year (BLS OEWS, May 2025). Most cnc machinists train through a trade school program or a registered apprenticeship before entering the field in Utah.

Compare CNC Machinist Schools in Utah

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#SchoolBOC Score (0–100)Tuition (published, per year)Median grad earnings (all majors)Graduation rateOnlineDistance
173.8Contact school for pricing$42,07075%Yes*75 mi
268.2$3,360 in-state / $6,840 out-of-state$46,12933%Yes*183 mi
Sponsored Ad
366.6$3,390 in-state / $6,750 out-of-state$55,12339%Yes*193 mi
463.7Contact school for pricing$47,22453%Yes*41 mi
Sponsored Ad
560.5$4,338 in-state / $14,288 out-of-state$38,94646%Yes*94 mi
659.3Contact school for pricing$39,28484%—19 mi
Sponsored Ad
752.3$3,923 in-state / $13,883 out-of-state$57,60241%Yes*197 mi
852.1$4,230 in-state / $10,530 out-of-state$52,87132%Yes*157 mi
Sponsored Ad
951.6$4,426 in-state / $14,244 out-of-state$55,27929%Yes*3 mi
1047.9Contact school for pricing$47,70657%—25 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Utah employs approximately 3,810 cnc machinists according to the Bureau of Labor Statistics, with a median annual wage of $61,280 1. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034, with about 29,500 openings per year 2. This page covers how to become a CNC Machinist in Utah, including requirements, training programs, and salary data.

At a Glance

  • Training paths: trade school, community college, or apprenticeship
  • Typical timeline: 1 to 5 years depending on the path
  • Median wage (Utah): $61,280 per year 1

Quick Answers About How to Become a CNC Machinist in Utah

How to become a CNC Machinist in Utah? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cnc machinists in Utah.

How long does it take? Most paths into the cnc machinist field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cnc machinists earn in Utah? The median annual wage for cnc machinists in Utah is $61,280 according to BLS data. Entry-level wages start around $43,160 and experienced professionals can earn $80,110 or more 1.

How to Become a CNC Machinist in Utah

  1. Finish high school or earn a GED. Most Utah training programs and registered apprenticeships require a high school diploma or GED to enroll.
  2. Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Utah that combines classroom instruction with supervised hands-on hours.
  3. Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
  4. Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cnc machinists in Utah before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

CNC Machinist Apprenticeship Information in Utah

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. Utah’s apprenticeship program is administered by the Department of Workforce Services - Office of Apprenticeship 3.

Contact Information:

  • Office: Salt Lake City Field Office
  • Address: 125 S. State Street, Salt Lake City, UT 84138
  • Email: [email protected]

CNC Machinist Wages by Metro Area in Utah

Machinists Wages by Metro Area in Utah

According to the Bureau of Labor Statistics ( OES data), machinists wages in Utah vary by metro area.

Metro AreaEmploymentMedian Annual WageAvg. Annual WageEntry Level
(10th pctile)		Experienced
(90th pctile)
Ogden1,260$65,270$62,520$43,890$79,210
Salt Lake City-Murray1,210$61,640$63,300$44,670$80,790
Provo-Orem-Lehi430$61,890$62,660$42,630$82,460
Logan380$58,620$57,810$39,000$74,390
St. George110$52,740$56,760$39,420$79,380

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cnc machinists in Utah? Utah currently employs approximately 3,810 cnc machinists 1. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034 2.

What training programs are available in Utah? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Utah. You can also contact the Department of Workforce Services - Office of Apprenticeship for apprenticeship opportunities.

How much do cnc machinists earn in Utah compared to the national average? The median annual wage for cnc machinists in Utah is $61,280, which is $5,130 above the national median of $56,150 according to BLS data 1.

In Utah

Top local programs

Related trades & nearby areas

Explore More Trades in Utah

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

  1. Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎

  2. Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

  3. Department of Workforce Services - Office of Apprenticeship: https://jobs.utah.gov/jsp/utjobs/seeker/ra ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

DataProviderVintage
Occupational Employment and Wage Statistics (OEWS)U.S. Bureau of Labor StatisticsMay 2025
Employment ProjectionsU.S. Bureau of Labor Statistics2024-2034
Integrated Postsecondary Education Data SystemNational Center for Education Statistics (IPEDS)2024
College Scorecard (school-level outcomes)U.S. Department of Educationlatest release
College Scorecard (field-of-study earnings)U.S. Department of Educationlatest release (updated 2026-06-12)
Occupational licensing requirementsCareerOneStop (U.S. Department of Labor)latest release (updated 2026-02-22)
Registered apprenticeship programsCareerOneStop / Apprenticeship.gov (U.S. Department of Labor)latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)U.S. Department of Labor (O*NET / Employment & Training Admin.)O*NET 29.1 (updated 2026-06-13)