What apprenticeships are available for cnc machinists in Wyoming?

In Wyoming, apprenticeships are typically registered through state apprenticeship agencies and trade union locals. See the apprenticeship section above for current contact information.

How to Become a CNC Machinist in Wyoming (2026)

Q: How much do cnc machinists earn in Wyoming?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), cnc machinists in Wyoming earned a median annual wage of approximately $63,070. Employment concentration in Wyoming is roughly 0.55 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for cnc machinists in Wyoming?

Wyoming currently employs approximately 290 workers, and the U.S. Bureau of Labor Statistics projects 0.0% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Wyoming machinists earn a median annual wage of $63,070 ($30.32/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 290 workers employed statewide. The state median is approximately 7.4% above the national median of $58,750 for the same occupation.

Key Takeaways

Median annual pay: $63,070 ($30.32/hr)
25th percentile: $47,090 per year
75th percentile: $78,990 per year
Top 10% earn: more than $91,650 per year
Entry-level (bottom 10%): under $37,430 per year
Workers employed in Wyoming: 290
Versus national median: 7.4% above the U.S. median of $58,750
Job concentration: Location quotient 0.55 - this occupation is less concentrated in Wyoming than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Wyoming employs about 290 cnc machinists earning a median $63,070 a year (BLS OEWS, May 2025). Most cnc machinists train through a trade school program or a registered apprenticeship before entering the field in Wyoming.

Compare CNC Machinist Schools in Wyoming

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Emily Griffith Technical College	74.9	Contact school for pricing	$45,935	97%	—	205 mi
2	Bridgerland Technical College	73.8	Contact school for pricing	$42,070	75%	Yes*	264 mi
Sponsored Ad
3	Red Rocks Community College	64.2	$4,859 in-state / $17,459 out-of-state	$62,695	32%	Yes*	203 mi
4	Casper College	62.5	$4,470 in-state / $10,770 out-of-state	$46,963	43%	Yes*	38 mi
Sponsored Ad
5	Front Range Community College	61.3	$4,663 in-state / $17,263 out-of-state	$50,353	35%	Yes*	194 mi
6	Western Dakota Technical College	60.4	$8,294	$49,930	54%	Yes*	215 mi
Sponsored Ad
7	Eastern Wyoming College	60.4	$4,290 in-state / $10,590 out-of-state	$38,259	52%	Yes*	133 mi
8	Northern Wyoming Community College District	60.3	$4,830 in-state / $11,130 out-of-state	$51,958	42%	Yes*	167 mi
Sponsored Ad
9	Colorado Mesa University	56.7	$9,927 in-state / $25,124 out-of-state	$58,601	41%	Yes*	247 mi
10	Western Wyoming Community College	52.1	$4,230 in-state / $10,530 out-of-state	$52,871	32%	Yes*	138 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Wyoming employs approximately 290 cnc machinists according to the Bureau of Labor Statistics, with a median annual wage of $63,070 ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034, with about 29,500 openings per year ². This page covers how to become a CNC Machinist in Wyoming, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Wyoming): $63,070 per year ¹

Quick Answers About How to Become a CNC Machinist in Wyoming

How to become a CNC Machinist in Wyoming? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for cnc machinists in Wyoming.

How long does it take? Most paths into the cnc machinist field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do cnc machinists earn in Wyoming? The median annual wage for cnc machinists in Wyoming is $63,070 according to BLS data. Entry-level wages start around $37,430 and experienced professionals can earn $91,650 or more ¹.

How to Become a CNC Machinist in Wyoming

Finish high school or earn a GED. Most Wyoming training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Wyoming that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to cnc machinists in Wyoming before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

CNC Machinist Apprenticeship Information in Wyoming

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years.

Contact Information:

Office: Cheyenne Field Office
Address: 308 West 21st Street, Cheyenne, WY 82001-3661
Email: [email protected]

CNC Machinist Wages by Metro Area in Wyoming

Machinists Wages by Metro Area in Wyoming

According to the Bureau of Labor Statistics ( OES data), machinists wages in Wyoming vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Grand Rapids-Wyoming-Kentwood	3,460	$50,110	$53,290	$38,160	$71,740
Casper	110	$55,250	$58,850	$35,990	$86,970

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for cnc machinists in Wyoming? Wyoming currently employs approximately 290 cnc machinists ¹. Nationally, cnc machinist employment is projected to grow 0.0% from 2024 to 2034 ².

What training programs are available in Wyoming? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Wyoming.

How much do cnc machinists earn in Wyoming compared to the national average? The median annual wage for cnc machinists in Wyoming is $63,070, which is $6,920 above the national median of $56,150 according to BLS data ¹.

In Wyoming

Best Trade Schools in Wyoming (2026)

Top local programs

Explore More Trades in Wyoming

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)