What apprenticeships are available for construction trades workers in New Hampshire?

In New Hampshire, registered apprenticeships are administered through the New Hampshire Department of Education - Registered Apprenticeship, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a Construction Trades Worker in New Hampshire (2026)

Q: How much do construction trades workers earn in New Hampshire?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), construction trades workers in New Hampshire earned a median annual wage of approximately $49,980. Employment concentration in New Hampshire is roughly 0.90 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for construction trades workers in New Hampshire?

New Hampshire currently employs approximately 4,330 workers, and the U.S. Bureau of Labor Statistics projects 7.3% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

New Hampshire employs about 4,330 construction trades workers earning a median $49,980 a year (BLS OEWS, May 2025). Most construction trades workers train through a trade school program or a registered apprenticeship before entering the field in New Hampshire.

Compare Construction Trades Worker Schools in New Hampshire

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Motoring Technical Training Institute	67.8	Contact school for pricing	$46,174	89%	—	100 mi
2	Hudson Valley Community College	62.7	$6,796 in-state / $11,852 out-of-state	$54,719	35%	Yes*	104 mi
Sponsored Ad
3	New England Institute of Technology	62.3	$37,275	$62,151	60%	Yes*	108 mi
4	Central Maine Community College	58.7	$4,140 in-state / $7,020 out-of-state	$51,345	30%	Yes*	99 mi
Sponsored Ad
5	York County Community College	56.0	$4,156 in-state / $7,036 out-of-state	$46,153	34%	Yes*	59 mi
6	Bristol Community College	49.8	$5,832 in-state / $10,776 out-of-state	$48,840	22%	Yes*	108 mi
Sponsored Ad
7	Connecticut State Community College	47.6	$5,338 in-state / $15,596 out-of-state	$50,130	24%	Yes*	110 mi
8	Southern Maine Community College	46.5	$4,156 in-state / $7,036 out-of-state	$53,543	28%	Yes*	82 mi
Sponsored Ad
9	White Mountains Community College	41.1	$7,050 in-state / $15,300 out-of-state	$60,674	62%	—	94 mi

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

New Hampshire employs approximately 4,330 construction trades workers according to the Bureau of Labor Statistics, with a median annual wage of $49,980 ¹. Nationally, construction trades worker employment is projected to grow 7.3% from 2024 to 2034, with about 129,400 openings per year ². This page covers how to become a Construction Trades Worker in New Hampshire, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (New Hampshire): $49,980 per year ¹

Quick Answers About How to Become a Construction Trades Worker in New Hampshire

How to become a Construction Trades Worker in New Hampshire? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for construction trades workers in New Hampshire.

How long does it take? Most paths into the construction trades worker field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do construction trades workers earn in New Hampshire? The median annual wage for construction trades workers in New Hampshire is $49,980 according to BLS data. Entry-level wages start around $38,020 and experienced professionals can earn $63,310 or more ¹.

How to Become a Construction Trades Worker in New Hampshire

Finish high school or earn a GED. Most New Hampshire training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in New Hampshire that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to construction trades workers in New Hampshire before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Construction Trades Worker Apprenticeship Information in New Hampshire

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. New Hampshire’s apprenticeship program is administered by the New Hampshire Department of Education - Registered Apprenticeship ³.

Contact Information:

Office: New Hampshire Department of Education
Address: 21 South Fruit Street, Concord, NH 03301
Phone: (603) 271-3494
Email: [email protected]

Construction Trades Worker Wages by Metro Area in New Hampshire

Construction Laborers Wages by Metro Area in New Hampshire

According to the Bureau of Labor Statistics ( OES data), construction laborers wages in New Hampshire vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Boston-Cambridge-Newton	11,580	$63,420	$71,350	$46,460	$99,410
Manchester-Nashua	1,070	$47,520	$49,550	$38,390	$62,040

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for construction trades workers in New Hampshire? New Hampshire currently employs approximately 4,330 construction trades workers ¹. Nationally, construction trades worker employment is projected to grow 7.3% from 2024 to 2034 ².

What training programs are available in New Hampshire? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in New Hampshire. You can also contact the New Hampshire Department of Education - Registered Apprenticeship for apprenticeship opportunities.

How much do construction trades workers earn in New Hampshire compared to the national average? The median annual wage for construction trades workers in New Hampshire is $49,980, which is $3,250 above the national median of $46,730 according to BLS data ¹.

In New Hampshire

Best Trade Schools in New Hampshire (2026)

Top local programs

Explore More Trades in New Hampshire

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
New Hampshire Department of Education - Registered Apprenticeship: https://www.apprenticeship.gov/ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)