Do crane operators need a license in New Mexico?

No statewide license is required for crane operators in New Mexico. Most employers expect industry certifications such as NCCCO Crane Operator Certification.

What apprenticeships are available for crane operators in New Mexico?

In New Mexico, registered apprenticeships are administered through the New Mexico Office of Apprenticeship, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a Crane Operator in New Mexico (2026)

Q: How long does crane operator training take in New Mexico?

Most people become a Crane Operator in New Mexico through NCCCO crane operator certification, plus any state or OSHA crane rules that apply. A registered apprenticeship is optional, not the default.

Q: How much do crane operators earn in New Mexico?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), crane operators in New Mexico earned a median annual wage of approximately $62,400. Employment concentration in New Mexico is about 1.23 times the national average for this occupation.

Q: What is the job outlook for crane operators in New Mexico?

New Mexico currently employs approximately 290 workers, and the U.S. Bureau of Labor Statistics projects 3.0% national employment change for this occupation from 2024 to 2034.

Updated September 2, 2026 | TradeCareerPath Editorial Team

New Mexico crane and tower operators earn a median annual wage of $62,400 ($30.00/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 290 workers employed statewide. The state median is approximately -8.3% below the national median of $68,080 for the same occupation.

Key Takeaways

Median annual pay: $62,400 ($30.00/hr)
25th percentile: $61,630 per year
75th percentile: $67,280 per year
Top 10% earn: more than $81,830 per year
Entry-level (bottom 10%): under $45,180 per year
Workers employed in New Mexico: 290
Versus national median: -8.3% below the U.S. median of $68,080
Job concentration: Location quotient 1.23 - this occupation is more concentrated in New Mexico than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed September 2, 2026.

New Mexico employs about 290 crane operators earning a median $62,400 a year (BLS OEWS, May 2025). Training as a Crane Operator here means completing NCCCO crane operator certification, plus any state or OSHA crane rules that apply. A registered apprenticeship is optional, not the default.

New Mexico employs approximately 290 crane operators according to the Bureau of Labor Statistics, with a median annual wage of $62,400 ¹. The state’s concentration of crane operator jobs is 1.23x the national average, indicating strong demand. Nationally, crane operator employment is projected to grow 3.0% from 2024 to 2034, with about 3,800 openings per year ². This page covers how to become a Crane Operator in New Mexico, including licensing requirements, training programs, and salary data.

At a Glance

Training paths: employer training, a crane school, or an optional union apprenticeship (find programs)
Typical timeline: NCCCO crane operator certification, plus any state or OSHA crane rules that apply. A registered apprenticeship is optional, not the default
Exam: NCCCO Crane Operator Certification
Median wage (New Mexico): $62,400 per year ¹

Quick Answers About How to Become a Crane Operator in New Mexico

How to become a Crane Operator in New Mexico? Complete NCCCO crane operator certification, plus any state or OSHA crane rules that apply. A registered apprenticeship is optional, not the default. Confirm credential rules with the program and employer.

How long does it take? Most people finish NCCCO crane operator certification, plus any state or OSHA crane rules that apply. A registered apprenticeship is optional, not the default. Confirm current hour totals with the program and employer.

Do I need a license in New Mexico? Most states do not require a statewide occupational license. Employers typically expect NCCCO Crane Operator Certification. See the licensing section below.

What do crane operators earn in New Mexico? The median annual wage for crane operators in New Mexico is $62,400 according to BLS data. Entry-level wages start around $45,180 and experienced professionals can earn $81,830 or more ¹.

How to Become a Crane Operator in New Mexico

Finish high school or earn a GED. Most New Mexico employers, crane schools, and optional union apprenticeships expect a high school diploma or GED.
Complete training. Train with an employer, a crane school, or an optional union apprenticeship. IUOE and DAS apprenticeships exist in some areas; they are not the only path and are not required to sit for NCCCO.
Pass NCCCO written and practical exams. Earn NCCCO certification for the crane type you will operate. NCCCO is the national certification body, not a program accreditor. Confirm current exam rules with NCCCO.
Apply for any state or city permit. OSHA crane rules and some states or cities add a permit on top of NCCCO. Confirm current local rules with the employer and the jurisdiction; do not treat a contractor license as the operator credential.

Steps and hour totals vary by credential level; confirm current requirements with the program and employer before you enroll.

Crane Operator License Requirements in New Mexico

Most states do not issue a statewide crane-operator occupational license. Employers and OSHA rules typically expect NCCCO crane operator certification (written and practical exams). A registered apprenticeship is optional, not the default. Some states and cities add a separate crane permit. Do not treat a contractor license as the operator credential.

Typical path

Meet basic education rules (high school diploma or GED).
Complete employer, school, or optional apprenticeship training.
Pass NCCCO written and practical exams for your crane type.
Apply for any extra state or city crane permit that applies.

Hour totals, fees, and reciprocity rules change. Confirm current requirements with the program and employer before you enroll.

Crane Operator Apprenticeship Information in New Mexico

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. New Mexico’s apprenticeship program is administered by the New Mexico Office of Apprenticeship ³.

Contact Information:

Office: New Mexico Department of Workforce Solutions
Address: 401 Broadway NE, Albuquerque, NM 87102
Phone: (505) 841-8565
Email: [email protected]

Crane Operator Wages by Metro Area in New Mexico

Crane and Tower Operators Wages by Metro Area in New Mexico

According to the Bureau of Labor Statistics ( OES data), crane and tower operators wages in New Mexico vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Las Cruces	50	$81,830	$73,450	$44,800	$99,020

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for crane operators in New Mexico? New Mexico currently employs approximately 290 crane operators ¹. Nationally, crane operator employment is projected to grow 3.0% from 2024 to 2034 ².

What training programs are available in New Mexico? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in New Mexico. You can also contact the New Mexico Office of Apprenticeship for apprenticeship opportunities.

How much do crane operators earn in New Mexico compared to the national average? The median annual wage for crane operators in New Mexico is $62,400, which is $3,970 below the national median of $66,370 according to BLS data ¹.

In New Mexico

Best Trade Schools in New Mexico (2026)

Explore More Trades in New Mexico

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
New Mexico Office of Apprenticeship: https://www.dws.state.nm.us/Job-Seeker/Jobs-and-Careers/Apprenticeship/Current-Programs ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)