How to Become a Dialysis Technician in New Hampshire (2026)

Q: How long does dialysis technician training take in New Hampshire?

Most people become a Dialysis Technician in New Hampshire through approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required.

Q: How much do dialysis technicians earn in New Hampshire?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), dialysis technicians in New Hampshire earned a median annual wage of approximately $57,580 (using the related "Health Technologists and Technicians, All Other" BLS category, since dialysis technician wages are not tracked separately). Employment concentration in New Hampshire is roughly 0.69 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for dialysis technicians in New Hampshire?

New Hampshire currently employs approximately 550 workers in the related "Health Technologists and Technicians, All Other" BLS category, and the U.S. Bureau of Labor Statistics projects 5.2% national employment change for this occupation from 2024 to 2034.

Updated September 2, 2026 | TradeCareerPath Editorial Team

New Hampshire health technologists and technicians, all other earn a median annual wage of $57,580 ($27.68/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 550 workers employed statewide. The state median is approximately 14.5% above the national median of $50,290 for the same occupation.

Key Takeaways

Median annual pay: $57,580 ($27.68/hr)
25th percentile: $47,740 per year
75th percentile: $67,730 per year
Top 10% earn: more than $83,170 per year
Entry-level (bottom 10%): under $42,130 per year
Workers employed in New Hampshire: 550
Versus national median: 14.5% above the U.S. median of $50,290
Job concentration: Location quotient 0.69 - this occupation is less concentrated in New Hampshire than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed September 2, 2026.

New Hampshire employs about 550 dialysis technicians earning a median $57,580 a year (BLS OEWS, May 2025; proxy category “Health Technologists and Technicians, All Other”). Training as a Dialysis Technician here means completing approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required. Confirm credential rules with the program and employer.

Compare Dialysis Technician Schools in New Hampshire

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Community College of Rhode Island	51.2	$5,550 - $14,834	$51,971	26%	Yes*	104 mi
2	Passaic County Community College	38.3	Contact school for pricing	$47,350	17%	Yes*	201 mi
Sponsored Ad
3	Dorsey College	24.3	Contact school for pricing	$34,001	48%	—	576 mi
4	Dorsey College-Wayne	14.8	Contact school for pricing	$34,001	36%	—	593 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

According to the Bureau of Labor Statistics, New Hampshire employs approximately 550 workers in the related “Health Technologists and Technicians, All Other” category (SOC 29-2099), with a median annual wage of $57,580 ¹. Nationally, employment in this category is projected to grow 5.2% from 2024 to 2034, with about 13,600 openings per year ². This page covers how to become a Dialysis Technician in New Hampshire, including licensing requirements, training programs, and salary data.

A note on salary data: The Bureau of Labor Statistics does not track dialysis technician salaries as a separate category. The wage figures on this page are based on the closest matching BLS classification: Health Technologists and Technicians, All Other (SOC 29-2099). Actual dialysis technician earnings may vary.

At a Glance

Training paths: approved hemodialysis technician training (find programs)
Typical timeline: approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required
Exam: NNCC CCHT, BONENT, or the exam the state accepts
Median wage (New Hampshire): $57,580 per year (based on related “Health Technologists and Technicians, All Other” category) ¹

Quick Answers About How to Become a Dialysis Technician in New Hampshire

How to become a Dialysis Technician in New Hampshire? Complete approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required. Confirm credential rules with the program and employer.

How long does it take? Most people finish approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required. Confirm current hour totals with the program and employer.

Do I need a license in New Hampshire? Licensing varies. Confirm with the program and employer. See the licensing section below.

What do dialysis technicians earn in New Hampshire? The BLS does not track dialysis technician wages separately. Based on the related “Health Technologists and Technicians, All Other” category, the median annual wage in New Hampshire is $57,580, with entry-level wages around $42,130 and experienced workers earning $83,170 or more ¹.

How to Become a Dialysis Technician in New Hampshire

Meet entry rules. Programs typically require a high school diploma or GED. Confirm current rules with the employer.
Complete approved hemodialysis technician training. Finish a state-approved dialysis technician program. This is not a registered apprenticeship.
Pass the required exam. Pass NNCC, BONENT, or the exam the employer accepts. CMS also expects a national dialysis technician credential.
Get listed or certified. Obtain CHT or the state equivalent where required. Confirm with the employer.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Dialysis Technician License Requirements in New Hampshire

Dialysis technicians in New Hampshire complete approved training and a national exam. Some states certify this role; most do not. Confirm with the employer when a state credential exists.

Typical path

Meet entry rules.
Complete approved hemodialysis technician training.
Pass NNCC, BONENT, or the state-accepted exam.
Obtain CHT or the state equivalent where required.

Hour totals, fees, and reciprocity rules change. Confirm current requirements with the employer before you enroll.

Dialysis Technician Wages by Metro Area in New Hampshire

Health Technologists and Technicians, All Other Wages by Metro Area in New Hampshire

According to the Bureau of Labor Statistics ( OES data), health technologists and technicians, all other wages in New Hampshire vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Boston-Cambridge-Newton	2,780	$60,940	$64,980	$45,760	$88,260
Manchester-Nashua	200	$57,580	$61,790	$40,910	$83,980

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for dialysis technicians in New Hampshire? New Hampshire employs approximately 550 workers in the related “Health Technologists and Technicians, All Other” category ¹. Nationally, employment in this category is projected to grow 5.2% from 2024 to 2034 ².

Can I work as a dialysis technician in New Hampshire with an out-of-state license? Confirm reciprocity rules with the program and employer.

What training programs are available in New Hampshire? Options include trade schools, community colleges, and state-approved training programs. Use the school finder above to search for programs in New Hampshire.

How much do dialysis technicians earn in New Hampshire compared to the national average? The median annual wage for dialysis technicians in New Hampshire is $57,580 (based on the related “Health Technologists and Technicians, All Other” category), which is $8,790 above the national median of $48,790 according to BLS data ¹.

In New Hampshire

Best Trade Schools in New Hampshire (2026)

Explore More Trades in New Hampshire

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)