How long does heavy equipment operator training take in New Hampshire?

Most paths into the heavy equipment operator field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What apprenticeships are available for heavy equipment operators in New Hampshire?

In New Hampshire, registered apprenticeships are administered through the New Hampshire Department of Education - Registered Apprenticeship, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a Heavy Equipment Operator in New Hampshire (2026)

Q: How much do heavy equipment operators earn in New Hampshire?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), heavy equipment operators in New Hampshire earned a median annual wage of approximately $62,200. Employment concentration in New Hampshire is roughly 0.63 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for heavy equipment operators in New Hampshire?

New Hampshire currently employs approximately 1,330 workers, and the U.S. Bureau of Labor Statistics projects 3.6% national employment change for this occupation from 2024 to 2034.

Updated September 2, 2026 | TradeCareerPath Editorial Team

New Hampshire operating engineers and other construction equipment operators earn a median annual wage of $62,200 ($29.91/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 1,330 workers employed statewide. The state median is approximately 3.9% above the national median of $59,850 for the same occupation.

Key Takeaways

Median annual pay: $62,200 ($29.91/hr)
25th percentile: $57,310 per year
75th percentile: $73,860 per year
Top 10% earn: more than $87,730 per year
Entry-level (bottom 10%): under $49,770 per year
Workers employed in New Hampshire: 1,330
Versus national median: 3.9% above the U.S. median of $59,850
Job concentration: Location quotient 0.63 - this occupation is less concentrated in New Hampshire than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed September 2, 2026.

New Hampshire employs about 1,330 heavy equipment operators earning a median $62,200 a year (BLS OEWS, May 2025). Most heavy equipment operators train through a trade school program or a registered apprenticeship before entering the field in New Hampshire.

Key Facts

Median wage (New Hampshire): $62,200/yr (Source: BLS OEWS, 2025)
Employed in New Hampshire: 1,330 workers (Source: BLS OEWS, 2025)
Location quotient: 0.63x U.S. average (Source: BLS OEWS, 2025)
Projected growth: 3.6% (2024-2034) (Source: BLS Employment Projections, 2024)

Heavy Equipment Operator Wages by Metro Area in New Hampshire

Operating Engineers and Other Construction Equipment Operators Wages by Metro Area in New Hampshire

According to the Bureau of Labor Statistics ( OES data), operating engineers and other construction equipment operators wages in New Hampshire vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Boston-Cambridge-Newton	6,370	$76,940	$85,960	$54,010	$125,860
Manchester-Nashua	210	$60,370	$65,560	$49,230	$88,690

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (New Hampshire): $62,200 per year ¹

Quick Answers About How to Become a Heavy Equipment Operator in New Hampshire

How to become a heavy equipment operator in New Hampshire? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for heavy equipment operators in New Hampshire.

How long does it take? Most paths take 1 to 5 years depending on whether you choose trade school, an apprenticeship, or a combination of both.

What do heavy equipment operators earn in New Hampshire? The median annual wage for heavy equipment operators in New Hampshire is $62,200 according to BLS data. Entry-level wages start around $49,770 and experienced professionals can earn $87,730 or more ¹.

How to Become a Heavy Equipment Operator in New Hampshire

Finish high school or earn a GED. Most New Hampshire training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an accredited trade school program or a registered apprenticeship in New Hampshire that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to heavy equipment operators in New Hampshire before you start working.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Heavy Equipment Operator Apprenticeship Information in New Hampshire

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. New Hampshire’s apprenticeship program is administered by the New Hampshire Department of Education - Registered Apprenticeship ³.

Contact Information:

Office: New Hampshire Department of Education
Address: 21 South Fruit Street, Concord, NH 03301
Phone: (603) 271-3494
Email: [email protected]

Frequently Asked Questions

What is the job outlook for heavy equipment operators in New Hampshire? New Hampshire currently employs approximately 1,330 heavy equipment operators ¹. Nationally, heavy equipment operator employment is projected to grow 3.6% from 2024 to 2034 ².

What training programs are available in New Hampshire? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for accredited programs in New Hampshire. You can also contact the New Hampshire Department of Education - Registered Apprenticeship for apprenticeship opportunities.

How much do heavy equipment operators earn in New Hampshire compared to the national average? The median annual wage for heavy equipment operators in New Hampshire is $62,200, which is $3,490 above the national median of $58,710 according to BLS data ¹.

In New Hampshire

Best Trade Schools in New Hampshire (2026)

Explore More Trades in New Hampshire

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
New Hampshire Department of Education - Registered Apprenticeship: https://www.apprenticeship.gov/ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)