How to Become a Hemodialysis Technician in Georgia (2026)

Updated June 8, 2026 | TradeCareerPath Editorial Team

Georgia employs about 6,360 hemodialysis technicians earning a median $49,310 a year (BLS OEWS, May 2025; proxy category “Health Technologists and Technicians, All Other”). Training as a Hemodialysis Technician here means completing approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required. Confirm credential rules with the program and employer.

Compare Hemodialysis Technician Schools in Georgia

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#SchoolBOC Score (0–100)Tuition (published, per year)Median grad earnings (all majors)Graduation rateOnlineDistance
161.0Contact school for pricing$40,63865%Yes*514 mi
254.3$3,516 in-state / $6,084 out-of-state$47,00958%Yes*31 mi
Sponsored Ad
351.1Contact school for pricing$35,45486%—556 mi
450.7$3,480 in-state / $6,048 out-of-state$40,58650%Yes*145 mi
Sponsored Ad
550.1$3,388 in-state / $5,956 out-of-state$40,63543%Yes*128 mi
647.9$3,382 in-state / $5,950 out-of-state$40,96449%Yes*61 mi
Sponsored Ad
746.5$3,448 in-state / $6,016 out-of-state$42,97947%Yes*30 mi
841.7$4,279$48,14124%Yes*416 mi
Sponsored Ad
939.3Contact school for pricing$34,96541%—176 mi
1038.7Contact school for pricing$28,44929%—423 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

According to the Bureau of Labor Statistics, Georgia employs approximately 6,360 workers in the related “Health Technologists and Technicians, All Other” category (SOC 29-2099), with a median annual wage of $49,310 1. Nationally, employment in this category is projected to grow 5.2% from 2024 to 2034, with about 13,600 openings per year 2. This page covers how to become a Hemodialysis Technician in Georgia, including licensing requirements, training programs, and salary data.

A note on salary data: The Bureau of Labor Statistics does not track hemodialysis technician salaries as a separate category. The wage figures on this page are based on the closest matching BLS classification: Health Technologists and Technicians, All Other (SOC 29-2099). Actual hemodialysis technician earnings may vary.

At a Glance

  • Training paths: approved hemodialysis technician training (find programs)
  • Typical timeline: approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required
  • Exam: NNCC CCHT, BONENT, or the exam the state accepts
  • Median wage (Georgia): $49,310 per year (based on related “Health Technologists and Technicians, All Other” category) 1

Quick Answers About How to Become a Hemodialysis Technician in Georgia

How to become a Hemodialysis Technician in Georgia? Complete approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required. Confirm credential rules with the program and employer.

How long does it take? Most people finish approved dialysis technician training, a national exam (NNCC, BONENT, or equivalent), and state CHT certification where required. Confirm current hour totals with the program and employer.

Do I need a license in Georgia? Licensing varies. Confirm with the program and employer. See the licensing section below.

What do hemodialysis technicians earn in Georgia? The BLS does not track hemodialysis technician wages separately. Based on the related “Health Technologists and Technicians, All Other” category, the median annual wage in Georgia is $49,310, with entry-level wages around $36,720 and experienced workers earning $92,380 or more 1.

How to Become a Hemodialysis Technician in Georgia

  1. Meet entry rules. Programs typically require a high school diploma or GED. Confirm current rules with the employer.
  2. Complete approved hemodialysis technician training. Finish a state-approved dialysis technician program. This is not a registered apprenticeship.
  3. Pass the required exam. Pass NNCC, BONENT, or the exam the employer accepts. CMS also expects a national dialysis technician credential.
  4. Get listed or certified. Obtain CHT or the state equivalent where required. Confirm with the employer.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Hemodialysis Technician License Requirements in Georgia

Dialysis technicians in Georgia complete approved training and a national exam. Some states certify this role; most do not. Confirm with the employer when a state credential exists.

Typical path

  1. Meet entry rules.

  2. Complete approved hemodialysis technician training.

  3. Pass NNCC, BONENT, or the state-accepted exam.

  4. Obtain CHT or the state equivalent where required.

Hour totals, fees, and reciprocity rules change. Confirm current requirements with the employer before you enroll.

Hemodialysis Technician Wages by Metro Area in Georgia

Hemodialysis Technician Wages by Metro Area in Georgia

Note: The BLS does not track hemodialysis technician wages separately. The data below is based on the closest matching category: Health Technologists and Technicians, All Other (SOC 29-2099).

According to the Bureau of Labor Statistics ( OES data), health technologists and technicians, all other wages in Georgia vary by metro area.

Metro AreaEmploymentMedian Annual WageAvg. Annual WageEntry Level
(10th pctile)		Experienced
(90th pctile)
Atlanta-Sandy Springs-Roswell3,590$54,290$62,810$39,610$101,090
Augusta-Richmond County390$49,050$57,570$36,210$92,380
Macon-Bibb County250$52,710$60,170$36,800$96,000
Savannah210$48,260$55,850$36,860$85,150
Gainesville190$45,490$55,170$36,910$85,970
Athens-Clarke County150$47,180$52,260$36,720$78,420
Columbus130$43,810$49,800$35,420$72,380
Rome120$38,650$46,380$35,800$62,960
Albany100$46,490$49,750$36,640$73,810
Warner Robins90$45,260$45,680$38,050$58,640
Chattanooga90$47,440$58,720$37,740$103,800
Brunswick-St. Simons80$45,700$50,980$35,650$83,610
Valdosta80$42,850$42,130$28,360$58,120
Dalton40$43,780$45,940$34,650$69,520

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for hemodialysis technicians in Georgia? Georgia employs approximately 6,360 workers in the related “Health Technologists and Technicians, All Other” category 1. Nationally, employment in this category is projected to grow 5.2% from 2024 to 2034 2.

Can I work as a hemodialysis technician in Georgia with an out-of-state license? Confirm reciprocity rules with the program and employer.

What training programs are available in Georgia? Options include trade schools, community colleges, and state-approved training programs. Use the school finder above to search for programs in Georgia.

How much do hemodialysis technicians earn in Georgia compared to the national average? The median annual wage for hemodialysis technicians in Georgia is $49,310 (based on the related “Health Technologists and Technicians, All Other” category), which is $520 above the national median of $48,790 according to BLS data 1.

In Georgia

Top local programs

Related trades & nearby areas

Explore More Trades in Georgia

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

  1. Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎

  2. Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

DataProviderVintage
Occupational Employment and Wage Statistics (OEWS)U.S. Bureau of Labor StatisticsMay 2025
Employment ProjectionsU.S. Bureau of Labor Statistics2024-2034
Integrated Postsecondary Education Data SystemNational Center for Education Statistics (IPEDS)2024
College Scorecard (school-level outcomes)U.S. Department of Educationlatest release
College Scorecard (field-of-study earnings)U.S. Department of Educationlatest release (updated 2026-06-12)
Occupational licensing requirementsCareerOneStop (U.S. Department of Labor)latest release (updated 2026-02-22)
Registered apprenticeship programsCareerOneStop / Apprenticeship.gov (U.S. Department of Labor)latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)U.S. Department of Labor (O*NET / Employment & Training Admin.)O*NET 29.1 (updated 2026-06-13)