How to Become a Sheet Metal Worker in Alabama (2026)
Alabama employs about 1,450 sheet metal workers earning a median $47,530 a year (BLS OEWS, May 2025). Most sheet metal workers train through a trade school program or a registered apprenticeship before entering the field in Alabama.
Alabama employs approximately 1,450 sheet metal workers according to the Bureau of Labor Statistics, with a median annual wage of $47,530 1. Nationally, sheet metal worker employment is projected to grow 2.4% from 2024 to 2034, with about 10,600 openings per year 2. This page covers how to become a Sheet Metal Worker in Alabama, including requirements, training programs, and salary data.
At a Glance
- Training paths: trade school, community college, or apprenticeship
- Typical timeline: 1 to 5 years depending on the path
- Median wage (Alabama): $47,530 per year 1
Quick Answers About How to Become a Sheet Metal Worker in Alabama
How to become a Sheet Metal Worker in Alabama? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for sheet metal workers in Alabama.
How long does it take? Most paths into the sheet metal worker field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.
What do sheet metal workers earn in Alabama? The median annual wage for sheet metal workers in Alabama is $47,530 according to BLS data. Entry-level wages start around $35,510 and experienced professionals can earn $71,270 or more 1.
How to Become a Sheet Metal Worker in Alabama
- Finish high school or earn a GED. Most Alabama training programs and registered apprenticeships require a high school diploma or GED to enroll.
- Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Alabama that combines classroom instruction with supervised hands-on hours.
- Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
- Meet state and employer requirements. Confirm any registration, certification, or employer requirements that apply to sheet metal workers in Alabama before you start working.
Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.
Sheet Metal Worker Apprenticeship Information in Alabama
Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years.
Contact Information:
- Office: Alabama Office of Apprenticeship
- Address: 1 Technology Court, Montgomery, AL 36116
- Phone: (334) 280-4440
Sheet Metal Worker Wages by Metro Area in Alabama
Sheet Metal Workers Wages by Metro Area in Alabama
According to the Bureau of Labor Statistics ( OES data), sheet metal workers wages in Alabama vary by metro area.
| Metro Area | Employment | Median Annual Wage | Avg. Annual Wage | Entry Level (10th pctile) | Experienced (90th pctile) |
|---|---|---|---|---|---|
| Birmingham | 530 | $48,090 | $53,230 | $35,510 | $71,270 |
| Huntsville | 140 | $51,460 | $56,760 | $43,330 | $86,300 |
| Montgomery | 80 | $51,230 | $54,930 | $36,850 | $79,060 |
| Daphne-Fairhope-Foley | 60 | $48,720 | $51,550 | $33,840 | $75,790 |
| Decatur | 50 | $46,940 | $47,480 | $35,700 | $58,880 |
| Columbus | 40 | $44,700 | $45,580 | $35,710 | $63,680 |
| Dothan | 30 | $45,700 | $46,600 | $34,130 | $61,580 |
| Tuscaloosa | 30 | $48,120 | $53,990 | $41,670 | $73,430 |
Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .
Frequently Asked Questions
What is the job outlook for sheet metal workers in Alabama? Alabama currently employs approximately 1,450 sheet metal workers 1. Nationally, sheet metal worker employment is projected to grow 2.4% from 2024 to 2034 2.
What training programs are available in Alabama? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Alabama.
How much do sheet metal workers earn in Alabama compared to the national average? The median annual wage for sheet metal workers in Alabama is $47,530, which is $13,320 below the national median of $60,850 according to BLS data 1.
Related guides
In Alabama
Related trades & nearby areas
- Best Carpenter Schools in Alabama (2026)
- Best Electrician Schools in Alabama
- Best HVAC Schools in Alabama (2026)
- Best Plumber Schools in Alabama
- Best Plumbing Schools in Alabama (2026)
- Best Welder Schools in Alabama
Explore More Trades in Alabama
- Electrician in Alabama
- Plumber in Alabama
- HVAC Technician in Alabama
- Welder in Alabama
- Carpenter in Alabama
- Solar Installation Technician in Alabama
- Auto Mechanic in Alabama
- CNC Machinist in Alabama
- Certified Nursing Assistant in Alabama
- Medical Assistant in Alabama
Citations
About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.
References
Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
Data sources
Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.
| Data | Provider | Vintage |
|---|---|---|
| Occupational Employment and Wage Statistics (OEWS) | U.S. Bureau of Labor Statistics | May 2025 |
| Employment Projections | U.S. Bureau of Labor Statistics | 2024-2034 |
| Integrated Postsecondary Education Data System | National Center for Education Statistics (IPEDS) | 2024 |
| College Scorecard (school-level outcomes) | U.S. Department of Education | latest release |
| College Scorecard (field-of-study earnings) | U.S. Department of Education | latest release (updated 2026-06-12) |
| Occupational licensing requirements | CareerOneStop (U.S. Department of Labor) | latest release (updated 2026-02-22) |
| Registered apprenticeship programs | CareerOneStop / Apprenticeship.gov (U.S. Department of Labor) | latest release (updated 2025-10-25) |
| O*NET occupation profiles (skills, tasks, tools, job zones) | U.S. Department of Labor (O*NET / Employment & Training Admin.) | O*NET 29.1 (updated 2026-06-13) |