What apprenticeships are available for steamfitters in Utah?

In Utah, registered apprenticeships are administered through the Department of Workforce Services - Office of Apprenticeship, which works with employers and trade union locals to register programs. See the apprenticeship section above for office contact details.

How to Become a Steamfitter in Utah (2026)

Q: How much do steamfitters earn in Utah?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), steamfitters in Utah earned a median annual wage of approximately $61,900. Employment concentration in Utah is about 1.35 times the national average for this occupation.

Q: What is the job outlook for steamfitters in Utah?

Utah currently employs approximately 7,030 workers, and the U.S. Bureau of Labor Statistics projects 4.5% national employment change for this occupation from 2024 to 2034.

Updated September 2, 2026 | TradeCareerPath Editorial Team

Utah plumbers, pipefitters, and steamfitters earn a median annual wage of $61,900 ($29.76/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 7,030 workers employed statewide. The state median is approximately -3.0% below the national median of $63,800 for the same occupation.

Key Takeaways

Median annual pay: $61,900 ($29.76/hr)
25th percentile: $49,120 per year
75th percentile: $77,440 per year
Top 10% earn: more than $83,120 per year
Entry-level (bottom 10%): under $43,860 per year
Workers employed in Utah: 7,030
Versus national median: -3.0% below the U.S. median of $63,800
Job concentration: Location quotient 1.35 - this occupation is more concentrated in Utah than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed September 2, 2026.

Utah employs about 7,030 steamfitters earning a median $61,900 a year (BLS OEWS, May 2025). Most steamfitters train through a trade school program or a registered apprenticeship before entering the field in Utah.

Compare Steamfitter Schools in Utah

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Emily Griffith Technical College	74.9	Contact school for pricing	$45,935	97%	—	376 mi
2	Bridgerland Technical College	73.8	Contact school for pricing	$42,070	75%	Yes*	75 mi
3	College of Eastern Idaho	66.6	$3,390 in-state / $6,750 out-of-state	$55,123	39%	Yes*	193 mi
4	Red Rocks Community College	64.2	$4,859 in-state / $17,459 out-of-state	$62,695	32%	Yes*	367 mi
5	Ogden-Weber Technical College	63.7	Contact school for pricing	$47,224	53%	Yes*	41 mi
6	Mountainland Technical College	59.3	Contact school for pricing	$39,284	84%	—	19 mi
7	Dixie Technical College	58.7	Contact school for pricing	$46,064	77%	—	261 mi
8	Salt Lake Community College	51.6	$4,426 in-state / $14,244 out-of-state	$55,279	29%	Yes*	3 mi
9	Davis Technical College	47.9	Contact school for pricing	$47,706	57%	—	25 mi
10	College of Southern Nevada	46.6	$4,358 in-state / $13,024 out-of-state	$51,080	19%	Yes*	358 mi

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Utah employs approximately 7,030 steamfitters according to the Bureau of Labor Statistics, with a median annual wage of $61,900 ¹. The state’s concentration of steamfitter jobs is 1.35x the national average, indicating strong demand. Nationally, steamfitter employment is projected to grow 4.5% from 2024 to 2034, with about 44,000 openings per year ². This page covers how to become a Steamfitter in Utah, including requirements, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Utah): $61,900 per year ¹

Quick Answers About How to Become a Steamfitter in Utah

How to become a Steamfitter in Utah? Complete a training program or apprenticeship, gain work experience, and meet any state or employer requirements for steamfitters in Utah.

How long does it take? Most paths into the steamfitter field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

What do steamfitters earn in Utah? The median annual wage for steamfitters in Utah is $61,900 according to BLS data. Entry-level wages start around $43,860 and experienced professionals can earn $83,120 or more ¹.

How to Become a Steamfitter in Utah

Finish high school or earn a GED. Most Utah training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Utah that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor as part of a registered apprenticeship or employer program in Utah.
Earn your journey card or employer qualification. Complete the registered apprenticeship or approved program, earn the journey card or employer qualification used in Utah, and confirm contractor versus worker rules with the state before working unsupervised.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Steamfitter Apprenticeship Information in Utah

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years. Utah’s apprenticeship program is administered by the Department of Workforce Services - Office of Apprenticeship ³.

Contact Information:

Office: Salt Lake City Field Office
Address: 125 S. State Street, Salt Lake City, UT 84138
Email: [email protected]

Steamfitter Wages by Metro Area in Utah

Plumbers, Pipefitters, and Steamfitters Wages by Metro Area in Utah

According to the Bureau of Labor Statistics ( OES data), plumbers, pipefitters, and steamfitters wages in Utah vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Salt Lake City-Murray	3,190	$64,800	$67,790	$47,870	$88,310
Provo-Orem-Lehi	1,450	$57,130	$59,060	$40,540	$78,420
Ogden	1,310	$64,860	$65,130	$40,540	$83,370
St. George	370	$56,730	$57,030	$38,040	$75,840
Logan	170	$60,390	$59,990	$38,790	$76,530

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for steamfitters in Utah? Utah currently employs approximately 7,030 steamfitters ¹. Nationally, steamfitter employment is projected to grow 4.5% from 2024 to 2034 ².

What training programs are available in Utah? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Utah. You can also contact the Department of Workforce Services - Office of Apprenticeship for apprenticeship opportunities.

How much do steamfitters earn in Utah compared to the national average? The median annual wage for steamfitters in Utah is $61,900, which is $1,070 below the national median of $62,970 according to BLS data ¹.

In Utah

Best Trade Schools in Utah (2026)

Explore More Trades in Utah

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
Department of Workforce Services - Office of Apprenticeship: https://jobs.utah.gov/jsp/utjobs/seeker/ra ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)