How to Become a Surgical Technician in New Mexico (2026)

Updated June 8, 2026 | TradeCareerPath Editorial Team

New Mexico employs about 540 surgical technicians earning a median $51,780 a year (BLS OEWS, May 2025). Training as a Surgical Technician here means completing a CAAHEP- or ABHES-accredited surgical technology program plus CST.

Compare Surgical Technician Schools in New Mexico

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#SchoolBOC Score (0–100)Tuition (published, per year)Median grad earnings (all majors)Graduation rateOnlineDistance
167.4$2,136 in-state / $4,704 out-of-state$50,01532%Yes*222 mi
253.0$1,928 in-state / $5,412 out-of-state$46,78637%Yes*227 mi
Sponsored Ad
352.9$16,000$36,18759%Yes*177 mi
451.8$2,060 in-state / $8,684 out-of-state$48,65231%Yes*82 mi
Sponsored Ad
551.5$2,688 in-state / $4,926 out-of-state$53,68637%Yes*248 mi
651.5$5,049 in-state / $17,649 out-of-state$49,17931%Yes*282 mi
Sponsored Ad
751.3$2,232 in-state / $10,320 out-of-state$62,40522%Yes*264 mi
850.3$4,510 in-state / $17,110 out-of-state$48,53821%Yes*315 mi
Sponsored Ad
946.5$4,080 in-state / $6,630 out-of-state$39,71224%Yes*177 mi
1045.0$2,766 in-state / $6,716 out-of-state$50,81835%—276 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

New Mexico employs approximately 540 surgical technicians according to the Bureau of Labor Statistics, with a median annual wage of $51,780 1. Nationally, surgical technician employment is projected to grow 4.5% from 2024 to 2034, with about 7,000 openings per year 2. This page covers how to become a Surgical Technician in New Mexico, including licensing requirements, training programs, and salary data.

At a Glance

  • Training paths: CAAHEP- or ABHES-accredited surgical technology program (find programs)
  • Typical timeline: a CAAHEP- or ABHES-accredited surgical technology program plus CST
  • Exam: NBSTSA CST
  • Median wage (New Mexico): $51,780 per year 1

Quick Answers About How to Become a Surgical Technician in New Mexico

How to become a Surgical Technician in New Mexico? Complete a CAAHEP- or ABHES-accredited surgical technology program plus CST. Confirm credential rules with the program and employer.

How long does it take? Most people finish a CAAHEP- or ABHES-accredited surgical technology program plus CST. Confirm current hour totals with the program and employer.

Do I need a license in New Mexico? Most states do not require a statewide occupational license. Employers typically expect NBSTSA CST. See the licensing section below.

What do surgical technicians earn in New Mexico? The median annual wage for surgical technicians in New Mexico is $51,780 according to BLS data. Entry-level wages start around $42,430 and experienced professionals can earn $78,650 or more 1.

How to Become a Surgical Technician in New Mexico

  1. Meet program entry rules. Programs typically require a high school diploma or GED.
  2. Complete an accredited surgical technology program. Finish a CAAHEP- or ABHES-accredited program in New Mexico. This is not a registered apprenticeship.
  3. Pass CST. Pass the NBSTSA Certified Surgical Technologist exam.
  4. Confirm state registration. Some states register surgical technologists. Confirm with the program and employer rather than assuming a statewide license everywhere.

Steps and hour totals vary by credential level; confirm current requirements with the program and employer before you enroll.

Surgical Technician License Requirements in New Mexico

Surgical technologists typically complete a CAAHEP- or ABHES-accredited program and pass CST. Some states add registration.

Typical path

  1. Complete an accredited surgical technology program.

  2. Pass CST.

  3. Register with the state if required.

Hour totals, fees, and reciprocity rules change. Confirm current requirements with the program and employer before you enroll.

Surgical Technician Wages by Metro Area in New Mexico

Surgical Technologists Wages by Metro Area in New Mexico

According to the Bureau of Labor Statistics ( OES data), surgical technologists wages in New Mexico vary by metro area.

Metro AreaEmploymentMedian Annual WageAvg. Annual WageEntry Level
(10th pctile)		Experienced
(90th pctile)
Albuquerque350$51,780$58,390$44,160$78,650

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for surgical technicians in New Mexico? New Mexico currently employs approximately 540 surgical technicians 1. Nationally, surgical technician employment is projected to grow 4.5% from 2024 to 2034 2.

What training programs are available in New Mexico? Options include trade schools, community colleges, and state-approved training programs. Use the school finder above to search for programs in New Mexico.

How much do surgical technicians earn in New Mexico compared to the national average? The median annual wage for surgical technicians in New Mexico is $51,780, which is $11,050 below the national median of $62,830 according to BLS data 1.

In New Mexico

Top local programs

Related trades & nearby areas

Explore More Trades in New Mexico

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

  1. Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎

  2. Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

DataProviderVintage
Occupational Employment and Wage Statistics (OEWS)U.S. Bureau of Labor StatisticsMay 2025
Employment ProjectionsU.S. Bureau of Labor Statistics2024-2034
Integrated Postsecondary Education Data SystemNational Center for Education Statistics (IPEDS)2024
College Scorecard (school-level outcomes)U.S. Department of Educationlatest release
College Scorecard (field-of-study earnings)U.S. Department of Educationlatest release (updated 2026-06-12)
Occupational licensing requirementsCareerOneStop (U.S. Department of Labor)latest release (updated 2026-02-22)
Registered apprenticeship programsCareerOneStop / Apprenticeship.gov (U.S. Department of Labor)latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)U.S. Department of Labor (O*NET / Employment & Training Admin.)O*NET 29.1 (updated 2026-06-13)