How long does surgical technician training take in Vermont?

Most people become a Surgical Technician in Vermont through a CAAHEP- or ABHES-accredited surgical technology program plus CST.

Do surgical technicians need a license in Vermont?

No statewide license is required for surgical technicians in Vermont. Most employers expect industry certifications such as NBSTSA CST.

How to Become a Surgical Technician in Vermont (2026)

Q: How much do surgical technicians earn in Vermont?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), surgical technicians in Vermont earned a median annual wage of approximately $60,660. Employment concentration in Vermont is roughly 0.60 of the national average, meaning fewer workers per capita than the U.S. as a whole.

Q: What is the job outlook for surgical technicians in Vermont?

Vermont currently employs approximately 140 workers, and the U.S. Bureau of Labor Statistics projects 4.5% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Vermont surgical technologists earn a median annual wage of $60,660 ($29.17/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 140 workers employed statewide. The state median is approximately -6.2% below the national median of $64,650 for the same occupation.

Key Takeaways

Median annual pay: $60,660 ($29.17/hr)
25th percentile: $51,040 per year
75th percentile: $72,270 per year
Top 10% earn: more than $88,460 per year
Entry-level (bottom 10%): under $49,510 per year
Workers employed in Vermont: 140
Versus national median: -6.2% below the U.S. median of $64,650
Job concentration: Location quotient 0.60 - this occupation is less concentrated in Vermont than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Vermont employs about 140 surgical technicians earning a median $60,660 a year (BLS OEWS, May 2025). Training as a Surgical Technician here means completing a CAAHEP- or ABHES-accredited surgical technology program plus CST.

Compare Surgical Technician Schools in Vermont

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Charles H McCann Technical School	74.3	Contact school for pricing	Not reported	100%	—	111 mi
2	Hudson Valley Community College	62.7	$6,796 in-state / $11,852 out-of-state	$54,719	35%	Yes*	117 mi
Sponsored Ad
3	Springfield Technical Community College	58.4	$5,904 in-state / $11,112 out-of-state	$51,917	32%	Yes*	149 mi
4	Massachusetts Bay Community College	58.1	$5,856 in-state / $10,800 out-of-state	$56,076	17%	Yes*	154 mi
Sponsored Ad
5	Quinsigamond Community College	58.1	$6,262 in-state / $11,206 out-of-state	$55,076	22%	Yes*	143 mi
6	Mohawk Valley Community College	55.3	$6,218 in-state / $8,851 out-of-state	$45,913	38%	Yes*	146 mi
Sponsored Ad
7	Bunker Hill Community College	55.2	$6,168 in-state / $11,112 out-of-state	$56,376	13%	Yes*	156 mi
8	Quincy College	49.7	$8,938	$59,190	15%	Yes*	165 mi
Sponsored Ad
9	North Shore Community College	46.7	$5,352 in-state / $10,920 out-of-state	$54,714	18%	—	147 mi
10	Southern Maine Community College	46.5	$4,156 in-state / $7,036 out-of-state	$53,543	28%	Yes*	134 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Vermont employs approximately 140 surgical technicians according to the Bureau of Labor Statistics, with a median annual wage of $60,660 ¹. Nationally, surgical technician employment is projected to grow 4.5% from 2024 to 2034, with about 7,000 openings per year ². This page covers how to become a Surgical Technician in Vermont, including licensing requirements, training programs, and salary data.

At a Glance

Training paths: CAAHEP- or ABHES-accredited surgical technology program (find programs)
Typical timeline: a CAAHEP- or ABHES-accredited surgical technology program plus CST
Exam: NBSTSA CST
Median wage (Vermont): $60,660 per year ¹

Quick Answers About How to Become a Surgical Technician in Vermont

How to become a Surgical Technician in Vermont? Complete a CAAHEP- or ABHES-accredited surgical technology program plus CST. Confirm credential rules with the program and employer.

How long does it take? Most people finish a CAAHEP- or ABHES-accredited surgical technology program plus CST. Confirm current hour totals with the program and employer.

Do I need a license in Vermont? Most states do not require a statewide occupational license. Employers typically expect NBSTSA CST. See the licensing section below.

What do surgical technicians earn in Vermont? The median annual wage for surgical technicians in Vermont is $60,660 according to BLS data. Entry-level wages start around $49,510 and experienced professionals can earn $88,460 or more ¹.

How to Become a Surgical Technician in Vermont

Meet program entry rules. Programs typically require a high school diploma or GED.
Complete an accredited surgical technology program. Finish a CAAHEP- or ABHES-accredited program in Vermont. This is not a registered apprenticeship.
Pass CST. Pass the NBSTSA Certified Surgical Technologist exam.
Confirm state registration. Some states register surgical technologists. Confirm with the program and employer rather than assuming a statewide license everywhere.

Steps and hour totals vary by credential level; confirm current requirements with the program and employer before you enroll.

Surgical Technician License Requirements in Vermont

Surgical technologists typically complete a CAAHEP- or ABHES-accredited program and pass CST. Some states add registration.

Typical path

Complete an accredited surgical technology program.
Pass CST.
Register with the state if required.

Hour totals, fees, and reciprocity rules change. Confirm current requirements with the program and employer before you enroll.

Surgical Technician Wages by Metro Area in Vermont

Surgical Technologists Wages by Metro Area in Vermont

According to the Bureau of Labor Statistics ( OES data), surgical technologists wages in Vermont vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Burlington-South Burlington	90	$60,660	$62,400	$49,510	$88,460

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for surgical technicians in Vermont? Vermont currently employs approximately 140 surgical technicians ¹. Nationally, surgical technician employment is projected to grow 4.5% from 2024 to 2034 ².

What training programs are available in Vermont? Options include trade schools, community colleges, and state-approved training programs. Use the school finder above to search for programs in Vermont.

How much do surgical technicians earn in Vermont compared to the national average? The median annual wage for surgical technicians in Vermont is $60,660, which is $2,170 below the national median of $62,830 according to BLS data ¹.

In Vermont

Best Trade Schools in Vermont (2026)

Top local programs

Explore More Trades in Vermont

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)