Do welders need a license in Wyoming?

No statewide license is required for welders in Wyoming. Most employers expect industry certifications such as AWS Certified Welder (CW), and OSHA 10/30 Safety Certification.

What apprenticeships are available for welders in Wyoming?

In Wyoming, apprenticeships are typically registered through state apprenticeship agencies and trade union locals. See the apprenticeship section above for current contact information.

How to Become a Welder in Wyoming (2026)

Q: How much do welders earn in Wyoming?

According to the U.S. Bureau of Labor Statistics OEWS data (May 2025), welders in Wyoming earned a median annual wage of approximately $63,820. Employment concentration in Wyoming is about 2.46 times the national average for this occupation.

Q: What is the job outlook for welders in Wyoming?

Wyoming currently employs approximately 1,850 workers, and the U.S. Bureau of Labor Statistics projects 2.2% national employment change for this occupation from 2024 to 2034.

Updated June 8, 2026 | TradeCareerPath Editorial Team

Wyoming welders, cutters, solderers, and brazers earn a median annual wage of $63,820 ($30.69/hr) according to U.S. Bureau of Labor Statistics OEWS data (May 2025), with about 1,850 workers employed statewide. The state median is approximately 18.7% above the national median of $53,750 for the same occupation.

Key Takeaways

Median annual pay: $63,820 ($30.69/hr)
25th percentile: $56,380 per year
75th percentile: $78,890 per year
Top 10% earn: more than $89,610 per year
Entry-level (bottom 10%): under $47,220 per year
Workers employed in Wyoming: 1,850
Versus national median: 18.7% above the U.S. median of $53,750
Job concentration: Location quotient 2.46 - this occupation is more concentrated in Wyoming than the national average

Source: BLS Occupational Employment and Wage Statistics (OEWS), May 2025. Last reviewed June 8, 2026.

Wyoming employs about 1,850 welders earning a median $63,820 a year (BLS OEWS, May 2025). No statewide license is required; most welders train through a certificate program and earn an industry certification before employers will hire them.

Compare Welder Schools in Wyoming

BOC Score, tuition, graduation rate, and median graduate earnings from federal IPEDS and U.S. Dept. of Education College Scorecard data. Tuition is the published annual figure for the latest reported year and excludes room, board, books and fees. Earnings are reported across all programs at the school (all majors), not a single trade. Distance is measured from the page's primary location.
#	School	BOC Score (0–100)	Tuition (published, per year)	Median grad earnings (all majors)	Graduation rate	Online	Distance
1	Emily Griffith Technical College	74.9	Contact school for pricing	$45,935	97%	—	97 mi
2	Laramie County Community College	67.1	$4,613 in-state / $10,913 out-of-state	$49,818	38%	Yes*	3 mi
Sponsored Ad
3	Front Range Community College	61.3	$4,663 in-state / $17,263 out-of-state	$50,353	35%	Yes*	86 mi
4	Eastern Wyoming College	60.4	$4,290 in-state / $10,590 out-of-state	$38,259	52%	Yes*	72 mi
Sponsored Ad
5	Western Nebraska Community College	59.9	$3,840 in-state / $4,410 out-of-state	$50,624	37%	Yes*	79 mi
6	Morgan Community College	59.9	$4,252 in-state / $16,852 out-of-state	$48,025	45%	Yes*	82 mi
Sponsored Ad
7	WyoTech	59.1	Contact school for pricing	$52,345	85%	—	43 mi
8	Aims Community College	52.8	$2,258 in-state / $11,786 out-of-state	$51,704	40%	Yes*	51 mi
Sponsored Ad
9	Northeastern Junior College	51.8	$5,730 in-state / $8,267 out-of-state	$47,153	56%	Yes*	92 mi
10	Lincoln College of Technology-Denver	43.8	Contact school for pricing	$51,742	71%	—	94 mi
Sponsored Ad

Schools closest to the page's primary location are gathered first, then ranked by BOC Score; distance from the page's primary location is shown for reference. The BOC Score is an independent measure of school outcomes (graduation, earnings, net price, retention) expressed as a 0–100 percentile within each school's peer group; higher is better and advertising never affects it. *Online availability refers to coursework; hands-on trade training is completed in person. Read the full methodology.

Wyoming employs approximately 1,850 welders according to the Bureau of Labor Statistics, with a median annual wage of $63,820 ¹. The state’s concentration of welder jobs is 2.46x the national average, indicating strong demand. Nationally, welder employment is projected to grow 2.2% from 2024 to 2034, with about 45,600 openings per year ². This page covers how to become a Welder in Wyoming, including certification options, training programs, and salary data.

At a Glance

Training paths: trade school, community college, or apprenticeship
Typical timeline: 1 to 5 years depending on the path
Median wage (Wyoming): $63,820 per year ¹

Quick Answers About How to Become a Welder in Wyoming

How to become a Welder in Wyoming? Wyoming does not require a state license for welders, but employers typically expect industry certifications such as AWS Certified Welder (CW) and OSHA 10/30 Safety Certification. Complete a training program to prepare.

How long does it take? Most paths into the welder field take 1 to 5 years, depending on whether you complete a trade school program, a registered apprenticeship, or a combination of both.

Do I need a license in Wyoming? No state license is required, but certifications such as AWS Certified Welder (CW) and OSHA 10/30 Safety Certification are expected by most employers.

What do welders earn in Wyoming? The median annual wage for welders in Wyoming is $63,820 according to BLS data. Entry-level wages start around $47,220 and experienced professionals can earn $89,610 or more ¹.

How to Become a Welder in Wyoming

Finish high school or earn a GED. Most Wyoming training programs and registered apprenticeships require a high school diploma or GED to enroll.
Complete a training program or apprenticeship. Enroll in an approved trade school program or a registered apprenticeship in Wyoming that combines classroom instruction with supervised hands-on hours.
Gain supervised work experience. Build documented on-the-job hours under a qualified supervisor; confirm the exact total currently required with the licensing board.
Earn an industry certification. While Wyoming does not require a statewide license, earn AWS Certified Welder (CW) to meet employer expectations and improve hiring prospects.

Steps and hour totals vary by credential level; confirm current requirements with the state board before you apply.

Welder Certification Options in Wyoming

Wyoming does not require a state license to work as a welder. However, industry certifications can strengthen your resume and may be required by employers.

Common certifications for welders include:

AWS Certified Welder (CW)
OSHA 10/30 Safety Certification

For more information, visit the American Welding Society (AWS) ³. Contact training programs in Wyoming for details on certification preparation courses.

Welder Apprenticeship Information in Wyoming

Apprenticeships combine paid on-the-job training with classroom instruction and typically last 3 to 5 years.

Contact Information:

Office: Cheyenne Field Office
Address: 308 West 21st Street, Cheyenne, WY 82001-3661
Email: [email protected]

Welder Wages by Metro Area in Wyoming

Welders, Cutters, Solderers, and Brazers Wages by Metro Area in Wyoming

According to the Bureau of Labor Statistics ( OES data), welders, cutters, solderers, and brazers wages in Wyoming vary by metro area.

Metro Area	Employment	Median Annual Wage	Avg. Annual Wage	Entry Level (10th pctile)	Experienced (90th pctile)
Grand Rapids-Wyoming-Kentwood	2,520	$48,920	$51,840	$39,540	$63,030
Casper	480	$62,660	$66,440	$48,450	$89,610
Cheyenne	180	$59,030	$57,610	$43,110	$76,830

Wages reflect survey data and vary based on experience, credentials, employer, and local market conditions. Source: U.S. Bureau of Labor Statistics, Occupational Employment and Wage Statistics (OEWS), May .

Frequently Asked Questions

What is the job outlook for welders in Wyoming? Wyoming currently employs approximately 1,850 welders ¹. Nationally, welder employment is projected to grow 2.2% from 2024 to 2034 ².

What training programs are available in Wyoming? Options include trade schools, community colleges, and apprenticeship programs. Use the school finder above to search for programs in Wyoming.

How much do welders earn in Wyoming compared to the national average? The median annual wage for welders in Wyoming is $63,820, which is $12,820 above the national median of $51,000 according to BLS data ¹.

In Wyoming

Best Trade Schools in Wyoming (2026)

Top local programs

Explore More Trades in Wyoming

Citations

About this guide: Researched and written by the TradeCareerPath Editorial Team. Our editorial team researches and sources every trade school and career guide using federal labor and education data, including BLS OEWS and Employment Projections, DOL apprenticeship records, IPEDS, College Scorecard, and state licensing boards. We follow the editorial standards documented at /editorial-policy/.

References

Bureau of Labor Statistics - Occupational Employment and Wage Statistics: https://www.bls.gov/oes/ ↩︎ ↩︎ ↩︎ ↩︎ ↩︎
Bureau of Labor Statistics - Employment Projections: https://www.bls.gov/emp/ ↩︎ ↩︎
American Welding Society (AWS): https://www.aws.org/certification/ ↩︎

Data sources

Figures on this page are sourced from the federal and state datasets below. Methodology: how we rank and source data.

Data	Provider	Vintage
Occupational Employment and Wage Statistics (OEWS)	U.S. Bureau of Labor Statistics	May 2025
Employment Projections	U.S. Bureau of Labor Statistics	2024-2034
Integrated Postsecondary Education Data System	National Center for Education Statistics (IPEDS)	2024
College Scorecard (school-level outcomes)	U.S. Department of Education	latest release
College Scorecard (field-of-study earnings)	U.S. Department of Education	latest release (updated 2026-06-12)
Occupational licensing requirements	CareerOneStop (U.S. Department of Labor)	latest release (updated 2026-02-22)
Registered apprenticeship programs	CareerOneStop / Apprenticeship.gov (U.S. Department of Labor)	latest release (updated 2025-10-25)
O*NET occupation profiles (skills, tasks, tools, job zones)	U.S. Department of Labor (O*NET / Employment & Training Admin.)	O*NET 29.1 (updated 2026-06-13)